panasonic CR16 Assembly free download

File name CR16 Assembly.pdf

CD Changer CR16 Mechanism AVC-NBG Assembly / Adjustment Procedure Any further updates or electrical faults can be accessed on Kbase within Technical Support(search on CR16) 1* * Denotes parts that did not require removal in Disassembly so may already be fitted 2* 3* 4* 5* Phase Mark Phase Mark Assembly Page 1/8 6 This part is critical Move side plate forward a fraction when fitting. When it clicks into position, move side plate back again. Arrowed tooth must locate in first slot of side plate as shown 7* 8* 9* Hold above gear in position whilst fitting gear below 10 Assembly Page 2/8 11* Refit screw if it was originally fitted, part number XTBS26+8J Be careful not to over-tighten-this gear is not used in mech operation, only used for the jig tool 12* 13* 14 15 Align the long tooth on the rack (see left) with the half tooth on the gear (see right) Assembly Page 3/8 16 Fit then screw in 17 18* Insert this way round NB Not necessary to remove this "lifter" gear in disassembly 19 Phase Adj. With the left side plate far back, this gear shou